HPFlap, Inc.
HPF, Inc.
13540 Indian Creek
Cleveland, Ohio 44130
Tel: 440-816-2195
Fax: 440-816-2196

Floating Suctions for Horizontal Tanks

Floating Suctions for above or below ground horizontal tanks are used where little or no contamination can be tolerated such as jet fuel. Since the fuel near the top is least likely to contain water or foreign particles, these assemblies are designed to float near the top of the liquid surface and drawing from this near surface contamination free liquid.


  • Maintenance Free
  • Easy movement in the liquid
  • Increase efficiency and decreases maintenance of filter separators.

  • Features:

  • Permanently lubricated dual race swivel joints
  • Triple sealed swivel joints for submerged service
  • Suction baffle and stop lag maintains minimum intake level of 8" above tank bottom or as specified
  • Aluminum 150 Lb. flat-faced flanges are standard, steel and stainless steel are also available

  • Dimensions:

  • Determined by tank diameter, location of manhole and style of floating suction

  • Sizes:   2", 3", 4", 6"

    Style A

    Style B

    Style C

    Style D

    Style E

    Style F

    © 2006 HPF, Inc.    Home  .:.  Contact  .:.  Policies